EPM3032ALC44-10
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2014 |
| Series | MAX® 3000A |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM3032 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 34 |
| Clock Frequency | 103.1MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 600 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 2 |
| RoHS Status | Non-RoHS Compliant |
EPM3032ALC44-10 Overview
There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a 44-LCC (J-Lead) package.There are 34 I/Os programmed in it.The device is programmed with 44 terminations.This electrical component has a terminal position of 0.The device is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The FPGA belongs to the MAX? 3000A series.The device can also be used to find [0].There are related parts in [0].In digital circuits, there are 600gates, which act as a basic building block.There are 2 logic elements/blocks.Initially, the maximum supply voltage (Vsup) is 3.6V.If the supply voltage (Vsup) is greater than 3V, then the device will work properly.The clock frequency of the device should not exceed 103.1MHz.
EPM3032ALC44-10 Features
44-LCC (J-Lead) package
34 I/Os
The operating temperature of 0°C~70°C TA
EPM3032ALC44-10 Applications
There are a lot of Intel EPM3032ALC44-10 CPLDs applications.
- Reset swapping
- Boolean function generators
- Power up sequencing
- Address decoders
- I/O PORTS (MCU MODULE)
- Preset swapping
- Multiple DIP Switch Replacement
- Random logic replacement
- STANDARD SERIAL INTERFACE UART
- Synchronous or asynchronous mode
