EPM3128ATI100-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3128ATI100-10N Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].As you can see, this device has 80 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.It is powered from a supply voltage of 3.3V.It is a part of the family [0].The chip is programmed with 100 pins.The device can also be used to find [0].For digital circuits, there are 2500gates. These devices serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.The device is designed with pins [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.Despite its minimal supply voltage of [0], it is capable of operating.There is a maximum frequency of 125MHz.Operating temperatures should be higher than -40°C.A temperature less than 85°Cshould be used for operation.The program consists of 8 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.There is a type of programmable logic called EE PLD.
EPM3128ATI100-10N Features
TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM3128ATI100-10N Applications
There are a lot of Altera EPM3128ATI100-10N CPLDs applications.
- INTERRUPT SYSTEM
- Voltage level translation
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Protection relays
- Auxiliary Power Supply Isolated and Non-isolated
- DMA control
- Storage Cards and Storage Racks
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Wide Vin Industrial low power SMPS
- State machine design
