EPM7160STI100-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 149.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7160STI100-10 Overview
In the mobile phone network, there are 160macro cells, which are cells with high-power antennas and towers.The item is enclosed in a TQFP package.There are 84 I/Os programmed in it.It is programmed to terminate devices at [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.This part is included in Programmable Logic Devices.With 100pins programmed, the chip is ready to use.As a building block for digital circuits, there are 3200gates.High efficiency requires a voltage supply of [0].In general, it is recommended to store data in [0].This device is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 5.5Vas its maximum supply voltage.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.There are 84 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There can be 125MHz frequency achieved.It is recommended that the operating temperature exceed -40°C.A temperature less than 85°Cshould be used for operation.There are 10logic blocks (LABs) that make up its basic building block.If the maximal frequency is less than [0], it should be lower than that.There are several types of programmable logic that can be categorized as EE PLD.
EPM7160STI100-10 Features
TQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160STI100-10 Applications
There are a lot of Altera EPM7160STI100-10 CPLDs applications.
- Power automation
- I/O expansion
- Synchronous or asynchronous mode
- LED Lighting systems
- POWER-SAVING MODES
- DMA control
- Custom shift registers
- Portable digital devices
- Power up sequencing
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
