EPM7256BUC169-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 160 |
| Published | 2014 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 169 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 169 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 141 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.55mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7256BUC169-7N Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].There are 141 I/Os programmed in it.There is a 169terminations set on devices.Its terminal position is BOTTOM.A voltage of 2.5V is used as the power supply for this device.This part is in the family [0].A chip with 169pins is programmed.Additionally, this device is capable of displaying [0].As a building block for digital circuits, there are 5000gates.Data is stored using [0].This electronic part is mounted in the way of Surface Mount.160pins are included in its design.It operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 3V.A power supply of 1.8/3.32.5Vvolts is required to operate this device.In total, there are 100programmable I/Os.The frequency that can be achieved is 166.67MHz.It is recommended that the operating temperature exceed 0°C.The operating temperature should be lower than 70°C.In total, it contains 16 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7256BUC169-7N Features
BGA package
141 I/Os
169 pin count
160 pins
1.8/3.32.5V power supplies
16 logic blocks (LABs)
EPM7256BUC169-7N Applications
There are a lot of Altera EPM7256BUC169-7N CPLDs applications.
- Custom state machines
- D/T registers and latches
- Programmable power management
- Digital multiplexers
- Handheld digital devices
- Field programmable gate
- ROM patching
- State machine design
- Code converters
- Software-Driven Hardware Configuration
