EPM9320ARC208-10N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 208 |
| Published | 1994 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin/Copper (Sn/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 132 |
| Memory Type | EEPROM |
| Clock Frequency | 144.9MHz |
| Propagation Delay | 10.8 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 6000 |
| Number of Logic Blocks (LABs) | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 320 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
EPM9320ARC208-10N Overview
This network has 320macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There are 132 I/Os programmed in it.There is a 208terminations set on devices.This electrical part is wired with a terminal position of QUAD.The power source is powered by 5Vvolts.208pins are programmed on the chip.In digital circuits, 6000gates serve as building blocks.High efficiency requires a voltage supply of [0].It is recommended that data be stored in [0].It is mounted by Surface Mount.The device is designed with pins [0].A voltage of 5.25V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.It is recommended that the operating temperature be higher than 0°C.It is recommended to keep the operating temperature below 70°C.20logic blocks (LABs) make up this circuit.Ideally, its clock frequency should not exceed 144.9MHz.There is a type of programmable logic called EE PLD.
EPM9320ARC208-10N Features
132 I/Os
208 pin count
208 pins
20 logic blocks (LABs)
EPM9320ARC208-10N Applications
There are a lot of Altera EPM9320ARC208-10N CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- Custom state machines
- Configurable Addressing of I/O Boards
- Preset swapping
- Complex programmable logic devices
- Protection relays
- USB Bus
- Code converters
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Boolean function generators
