FAN5404UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, WLCSP |
| Number of Pins | 20 |
| Weight | 73mg |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FAN5404 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.8V |
| Max Output Current | 1.25A |
| Power Supplies | 5V |
| Interface | I2C, USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Max Output Voltage | 4.4V |
| Max Input Voltage | 20V |
| Supply Current-Max (Isup) | 0.09mA |
| Min Output Voltage | 3.5V |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.5V Max |
| Height | 378μm |
| Length | 1.96mm |
| Width | 1.87mm |
| RoHS Status | RoHS Compliant |
FAN5404UCX Overview
I found it in the Tape & Reel (TR) package, which comes with everything you need.For convenience, it is included in the 20-UFBGA, WLCSP package.It appears that the device's mounting type is Surface Mount.The best way to adjust the temperature is to set it to -30°C~85°C TA.Analog IC ANALOG CIRCUIT is responsible for implementing the device.Charge the device by supplying it with Constant - Programmable current.Based on the base part number FAN5404, it is possible to find related parts for this device.There are 20 terminations in it.Hence, the battery pack is at 4.5V Max when it comes to voltage.The unit is equipped with a number of programmable features, including Current, Timer, Voltage.To operate the product, it is necessary that 20 pins be inserted into the device.The battery would need to have a voltage of 5V for the device to work.It is capable of withstanding a 6V supply voltage.Ideally, when the output voltage of the device is set to 1.8V, you will be able to achieve the highest degree of efficiency.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 4V is suitable for it, because it can operate with a low supply voltage.In order to mount it, it has to align itself with Surface Mount.0.09mA is set for Vsup (maximum supply voltage).5V is the power supply setting for the part.This device can accept up to 20V volts of input voltage.As a maximum output supply voltage for this operation, the voltage must be set to 4.4V.To meet operation conditions, the maximum output current is reduced to 1.25A.
FAN5404UCX Features
Battery pack voltage of 4.5V Max
Power Management Circuits subcategory
20-UFBGA, WLCSP package
FAN5404UCX Applications
There are a lot of ON Semiconductor FAN5404UCX Battery Chargers ICs applications.
- Electric lift car
- Conventional charge
- Crosswalk marker lights
- Painting boat
- Smart speakers
- Home routers
- Mobile router
- Portable devices
- Rental fleets
- Portable medical instruments
