FAN5776UCX
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFBGA, WLCSP |
| Number of Pins | 12 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | FAN5776 |
| Number of Outputs | 5 |
| Max Output Current | 25mA |
| Operating Supply Voltage | 3.7V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Output Current | 100mA |
| Max Supply Current | 25mA |
| Max Output Voltage | 8.5V |
| Voltage - Output | 3.5V~8.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 25mA |
| Min Output Voltage | 3.5V |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1.8MHz |
| Nominal Input Voltage (DC) | 3.7V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN5776UCX Overview
12-UFBGA, WLCSP package saves space on the board. LED drivers designed using this technology use 5 outputs.This mounting method is Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are considerable benefits for Backlight.For its operation, 12 terminations are designed.With a base of 12, this LED light driver is configured.It has been mounted on Surface Mount.LED drivers have a base part number of FAN5776.5.5V is a reasonable voltage.This device has an output voltage of 3.5V~8.5V volts.Further, it can be classified as Display Drivers based on its characteristics.This device requires a minimum voltage of 2.3V volts.The allowable maximum value of supply current reaches 5.5V.With a minimum supply current less than 25mA, this device achieves high efficiency.The current that can be supplied to the load is 100mA.The power of systems depends on having 3.7V voltages inside.This electronic component can fully perform its functions when the switching frequency is kept at 1.8MHz.When operating with a maximum output current of 25mA, it can deliver all the benefits of a LED driver.Voltages should not exceed 8.5V volts at the output.It maintains a minimum voltage of 3.5V.A total of 2 transmission channels are available.
FAN5776UCX Features
Available in the 12-UFBGA, WLCSP package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 3.7V
Switching frequency of 1.8MHz
FAN5776UCX Applications
There are a lot of ON Semiconductor FAN5776UCX LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
- Medical surgery lighting
- Street lighting
- OLED power supply for portable equipment
- Replacement lamps
- LED headlights
