FDMF3033
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 31-PowerWFQFN |
| Number of Pins | 31 |
| Weight | 121.33333mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Series | PowerTrench® |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit, Diode Emulation |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 33 |
| Terminal Finish | Tin (Sn) |
| Applications | Synchronous Buck Converters |
| Additional Feature | ALSO AVAILABLE WITH 4.5 TO 16 V INPUT; AVAILABLE IN PFM MODE |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-XBCC-N33 |
| Max Output Current | 60A |
| Input Voltage-Nom | 5V |
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Half Bridge |
| Input Voltage (Min) | 4.5V |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 5.5V |
| Output Current per Channel | 60A |
| Control Technique | PULSE WIDTH MODULATION |
| Voltage - Load | 4.5V~24V |
| Switching Frequency-Max | 1500kHz |
| Fault Protection | Shoot-Through |
| Rds On (Typ) | 1 Ω LS, 1 Ω HS |
| Load Type | Inductive |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
FDMF3033 Overview
In order to package H bridge, Cut Tape (CT) is used.In order to save costs, H bridge is included in the 31-PowerWFQFN package.Based on 4.5V~5.5V, improved reliabilbridge drivery can be achieved.Mounted on Surface Mount.When -40°C~125°C TJ is operating at a certain temperature, motor driver H bridge can function normally.H bridge motor driver has many applications, including Synchronous Buck Converters.Surface Mount is adopted as a technique to mount H gate on the PCB.Bootstrap Circuit, Diode Emulation is also one of full bridges specific characteristics.There are 33 terminations used to end a transmission line with the H bridge that matches the characteristic impedance of the line.An interface using 31 pins is used to provide pronged contact.IC type SWITCHING REGULATOR is used as H bridge circuit's analog IC.A H-bridge belonging to the PowerTrench? series, it is an electronic H-bridge.An ambient temperature of 60A enables a power supply to provide a maximum load current.Also, H-bridge is capable of providing ALSO AVAILABLE WITH 4.5 TO 16 V INPUT; AVAILABLE IN PFM MODE.
FDMF3033 Features
Available in 31-PowerWFQFN Package / Case
Operating Temperature at the range of Surface Mount
With ALSO AVAILABLE WITH 4.5 TO 16 V INPUT; AVAILABLE IN PFM MODE Drivers
FDMF3033 Applications
There are a lot of ON Semiconductor FDMF3033 Full Bridge Drivers, Half-Bridge Drivers applications.
- PC peripherals
- Optical disc drives
- High-Performance Gaming Motherboards
- Quad DC motor
- Industrial Automation
- Industrial Fans
- V-Core
- CD players
- Small Form-Factor Voltage Regulator Modules
- VTR
