FPF1048BUCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1048 |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 3A |
| Power Dissipation | 1.2W |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3A |
| Switch Type | General Purpose |
| Min Input Voltage | 1.5V |
| Max Input Voltage | 5.5V |
| Voltage - Load | 1.5V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 21m Ω |
| Height | 332μm |
| Length | 1mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF1048BUCX Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 6-UFBGA, WLCSP.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.There is a default setting of 1 for output.A voltage of Not Required is used to power it.Slew Rate Controlled features are available on the lighting driver.It belongs to the family FPF1048.A total of 6 terminations can be found in it.In order to operate, 6 pins are used.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 3A to meet the operation criteria.Supply voltages of 4.5V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.It has 110mOhm resistance.It is part of the IntelliMAX? series.As a result, the output current is set to 2.5A.This gadget uses an analog IC, which is SPST in this case.There are a total of 1 available channels.Optimal efficiency requires a voltage of 5.5V.As far as input voltage goes, its maximum is 5.5V volts.It has a 1.5V volt minimum input voltage.The maximum operating temperature of 85°C°C allows for stable operation.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.A maximum current requirement of 3A is required for its operation.
FPF1048BUCX Features
Supplied from 4.5V
Resistance of 110mOhm
1 channels
FPF1048BUCX Applications
There are a lot of ON Semiconductor FPF1048BUCX Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Set-top-box
- Smart Phones, Feature Phones
- Portable/Handheld Devices
- Handheld Devices
- USB Ports/Hubs
- Portable Devices
- Wireless Headsets
- Portable GPS
- Hot Swap
