FPF1203UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 67mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 185mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1203 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.2A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 200mA |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 170 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 121 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Rds On (Typ) | 45m Ω |
| Height | 292μm |
| Length | 760μm |
| Width | 760μm |
| RoHS Status | ROHS3 Compliant |
FPF1203UCX Overview
Tape & Reel (TR) is how it's packaged.This package is included in 4-UFBGA, WLCSP.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts has been specified.It has a total of Slew Rate Controlled features.The FPF1203 family consists of this type.As a result, there are 4 terminations.The 4 pins are used for the operation of the system.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 2.2A.A supply voltage of 3.3V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.There is 185mOhm resistance on the LED driver.Electrical components such as this are included in the IntelliMAX? series.It is set to 1.5A in this case.There is an analog input IC in this gadget, which is SPST.You can select from 1 channels.In order to maximize efficiency, the supply voltage should be set to 5.5V.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 1.2V volts for this LED driver.
FPF1203UCX Features
Supplied from 3.3V
Resistance of 185mOhm
1 channels
FPF1203UCX Applications
There are a lot of ON Semiconductor FPF1203UCX Power Switches ICs applications.
- Mobile Communication Devices
- Gaming
- PC Card Hot Swap
- Hot Swap
- HDD, SSD
- Portable Music Players
- PDAs
- Handheld Devices
- USB Power Distribution
- Smart Phones, Feature Phones
