FPF2000
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 23g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 250mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Current Rating | 50mA |
| Base Part Number | FPF2000 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 50mA |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 250mW |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 10μs |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 50mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 700m Ω |
| Drain to Source Resistance | 700mOhm |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2000 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 5-TSSOP, SC-70-5, SOT-353 package.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.There are Auto Restart, Status Flag features available on the LED driving board.It belongs to the family FPF2000.As a result, there are 5 terminations.For operation, 5 pins are used.As far as functions are concerned, the lighting driver has 1.To meet the operation criteria, the maximum output current drops to 50mA.It is mounted in the way of Surface Mount.Currently, the LED driving board has 700mOhm resistance.It is part of the IntelliMAX? series.When this is the case, the output current is set to 100mA.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.The maximum input voltage of the LED driver is 5.5V volts.It has a 1.8V volt minimum input voltage.
FPF2000 Features
Resistance of 700mOhm
FPF2000 Applications
There are a lot of ON Semiconductor FPF2000 Power Switches ICs applications.
- Smartphone and PDA
- PC Cards
- PDAs
- Portable Devices
- Portable Video Game Players
- HDD and SSD
- Hot Swaps
- Set-Top Boxes
- Wireless Modem Data Cards
- Solid State Drivers
