FPF2100
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 200mA |
| Base Part Number | FPF2100 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 125m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2100 Overview
It is package in Tape & Reel (TR) case.Package SC-74A, SOT-753 contains it.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.The lighting driver has Auto Restart, Status Flag features.It belongs to the FPF2100 family.A total of 5 terminations can be found in it.5 pins are used for operation.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 200mA.Supply voltages of 3.3V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.In this LED driving board, there is 125mOhm resistance.This electrical component is part of the IntelliMAX? series.This case has the output current set to 200mA.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.Input voltage is limited to 5.5V volts.Input voltage must be at least 1.8V volts.
FPF2100 Features
Supplied from 3.3V
Resistance of 125mOhm
FPF2100 Applications
There are a lot of ON Semiconductor FPF2100 Power Switches ICs applications.
- Wireless/Networking Cards
- Mobile Communication Devices
- Portable Video Game Players
- Portable Devices
- USB Power Distribution
- Storage Drives
- Solid State Drivers
- Wearable Devices
- Various applications equipped with buttons
- Portable GPS
