FPF2101
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | FPF2101 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 200mA |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 12μs |
| Fall Time (Typ) | 136 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 125m Ω |
| Drain to Source Resistance | 125mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2101 Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the SC-74A, SOT-753 package.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.I believe it belongs to the FPF2101 family.As a result, there are 5 terminations.It is necessary to use the 5 pins in order to operate the LED driver.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 200mA.The supply voltage of 3.3V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.It has a resistance of 160mOhm.It is included in the IntelliMAX? series.When this is the case, the output current is set to 200mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.It has a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 1.8V volts.
FPF2101 Features
Supplied from 3.3V
Resistance of 160mOhm
FPF2101 Applications
There are a lot of ON Semiconductor FPF2101 Power Switches ICs applications.
- USB3.1 Power Delivery
- Telecom and Network Systems
- Set-top-box
- PC Card Hot Swap
- Hot-Swap Systems
- Storage Drives
- USB Ports/Hubs
- Portable GPS
- Wireless Headsets
- Wearable Devices
