banner_page

FPF2108

P-Channel PMIC IntelliMAX? Series FPF2108 5 Pin 3.3V SC-74A, SOT-753


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF2108
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 667
  • Description: P-Channel PMIC IntelliMAX? Series FPF2108 5 Pin 3.3V SC-74A, SOT-753 (Kg)

Details

Tags

Parameters
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Weight 30mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 1996
Series IntelliMAX™
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Resistance 125mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Power Rating 667mW
Max Power Dissipation 667mW
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Base Part Number FPF2108
Number of Outputs 1
Output Voltage 6V
Output Type P-Channel
Max Output Current 400mA
Operating Supply Voltage 5.5V
Voltage 5.5V
Interface On/Off
Current 800mA
Output Configuration High Side
Power Dissipation 667mW
Output Current 400mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.8V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 1.8V~5.5V
Driver Number of Bits 1
Min Current Limit 400mA
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 0.6A
Rds On (Typ) 125m Ω
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height 1.25mm
Length 3mm
Width 1.7mm
Radiation Hardening No
REACH SVHC No SVHC

FPF2108 Overview


It is packaged in the manner of a Tape & Reel (TR).This package is included in SC-74A, SOT-753.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.The maximum output voltage is P-Channel volts.There are Status Flag features available on the LED driving board.It is part of the FPF2108 family of LED drivers.It contains 5 terminations.In order to operate, 5 pins are used.The LED driver has 1 functions.The maximum output current must drop to 400mA to meet the operation criteria.High efficiency is possible at 3.3V supply voltage.The LED driving board is mounted in the way of Surface Mount.It has 125mOhm resistance.There is an electrical component included in the IntelliMAX? series.In this case, the output current will be set to 400mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In order to maximize efficiency, the supply voltage should be set at 5.5V.The maximum input voltage of the LED driver is 5.5V volts.It has a 1.8V volt minimum input voltage.

FPF2108 Features


Supplied from 3.3V
Resistance of 125mOhm

FPF2108 Applications


There are a lot of ON Semiconductor FPF2108 Power Switches ICs applications.

  • Notebook PC
  • Mobile Communication Devices
  • Low Voltage I/O System Power
  • Hot Swap
  • Hot Swap
  • Portable Music Players
  • Wireless Headsets
  • Wireless/Networking Cards
  • PC Cards
  • HDD, SSD

Write a review

Note: HTML is not translated!
    Bad           Good