FPF2225
| Parameters | |
|---|---|
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2225 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 625mA |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 627mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 600 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 250mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.66A |
| Rds On (Typ) | 140m Ω |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| Height | 725μm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 230mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Peripheral Drivers |
| Power Rating | 3.8W |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
FPF2225 Overview
A Tape & Reel (TR) is used to package it.It is included in the package 6-VDFN Exposed Pad.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.Load Discharge, Status Flag features are available on the lighting driver.There is a FPF2225 family of things that it belongs to.A total of 6 terminations have been found in it.The operation is performed through the 6 pins.As far as the lighting driver is concerned, there are 1 functions.Using a voltage of 3.3V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.In this case, there is 230mOhm resistance in the LED driving board.The output current is set to 627mA in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.Optimal efficiency requires a voltage of 5.5V.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 1.8V volts.
FPF2225 Features
Supplied from 3.3V
Resistance of 230mOhm
FPF2225 Applications
There are a lot of ON Semiconductor FPF2225 Power Switches ICs applications.
- Notebook PC
- Mobile Communication Devices
- Portable Devices
- Set-top-box
- Hot Swap
- Wireless Modem Data Cards
- Smartphone and PDA
- Hard Disk Drives
- PDAs
- Notebook and Tablet Computers
