FPF2702MX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | AccuPower™ |
| JESD-609 Code | e4 |
| Feature | Power Good, Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 88mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2702 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 92μA |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.8V |
| Max Input Voltage | 36V |
| Nominal Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.8V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.4A |
| Rds On (Typ) | 88m Ω |
| Max Junction Temperature (Tj) | 125°C |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2702MX Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.Power Good, Slew Rate Controlled, Status Flag features are available on the lighting driver.I believe it belongs to the FPF2702 family.It has a total of 8 terminations.In order to operate, 8 pins are used.It consists of 1 functions.The maximum output current must drop to 2A to meet the operation criteria.Using a voltage of 12V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.88mOhm is the resistance of the lighting driver.These electrical components are part of the AccuPower? series.When this case is used, the output current is set to 2A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 36V.It has a maximum input voltage of 36V volts.As a minimum input voltage, it requires 2.8V volts.
FPF2702MX Features
Supplied from 12V
Resistance of 88mOhm
FPF2702MX Applications
There are a lot of ON Semiconductor FPF2702MX Power Switches ICs applications.
- HDD, SSD
- USB Power Distribution
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Portable GPS Device
- Wireless Headsets
- Gaming
- USB Ports/Hubs
- Notebook and Tablet Computers
- Notebook PC
