FSL146MRBN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 815.6mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2.6Ohm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 35W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 23W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | FSL146 |
| Number of Outputs | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 400μA |
| Current | 1.5A |
| Power Dissipation | 1.5W |
| Voltage - Supply (Vcc/Vdd) | 7.5V~26V |
| Max Supply Current | 500μA |
| Turn On Delay Time | 13 ns |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Turn-Off Delay Time | 30 ns |
| Max Output Power | 26W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.67mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSL146MRBN Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.In Tube case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.As a result, the switching frequency reaches 67kHz .Vcc/Vdd can be used within the range of 7.5V~26V supply voltage.It has a total of 8 terminations.The ac/dc converter has a total of 8 pins.There are no problem mounting the ac dc converters by Through Hole .It belongs to the family of FPS? manufacturers.The FSL146 family can be used to search for similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is capable of handling a maximum supply current of 500μA A.This power AC DC's resistance can be determined to be 2.6Ohm .With a maximum output power of 26W , the AC to DC power converter can be used.
FSL146MRBN Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Resistance : 2.6Ohm
FSL146MRBN Applications
There are a lot of ON Semiconductor FSL146MRBN AC DC Converters applications.
- Cleaners
- Battery chargers for media tablets
- Rice Cooker
- Portable audio
- AC?DC USB chargers for Cell Phones
- Open Frame Switching Power Supply
- White goods
- Standby Power Supply
- Chargers for cell/cordless phones
- Small off-line low voltage power supplies
