banner_page

FST16292MTDX

4V~5.5V 56 Pin 16292 Signal switch12 OutputsMin 4V VMax 5.5V V


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FST16292MTDX
  • Package: 56-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 713
  • Description: 4V~5.5V 56 Pin 16292 Signal switch12 OutputsMin 4V VMax 5.5V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-TFSOP (0.240, 6.10mm Width)
Number of Pins 56
Supplier Device Package 56-TSSOP
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Multiplexer/Demultiplexer
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4V~5.5V
Base Part Number 16292
Number of Outputs 12
Operating Supply Voltage 5V
Number of Elements 1
Circuit 12 x 1:2
Number of Circuits 12
Max Supply Voltage 5.5V
Min Supply Voltage 4V
Number of Bits 24
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 7.8 ns
Number of Inputs 24
Supply Type Single
Low Level Output Current 128mA
Number of Input Lines 24
Voltage Supply Source Single Supply
Independent Circuits 1
Number of Output Lines 12
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

FST16292MTDX Overview


Due to the fact that it is provided in the 56-TFSOP (0.240, 6.10mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.As its base part number is 16292, logic switch can also be used to find its related parts.Its supply type is Single, which is used as the source of power.A total of 56 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.Signal multiplexer consists of 24 bits.There are 12 outputs designed to operate the turn signal switch.Without any external influences, it consumes 3μA current of multiplexer ic at all times.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The multiplexer provides 24 inputs.On the multiplexers, 24 input lines are provided for accepting voltage levels.As the signal source, there are 12 output lines.The maximum temperature for this signal switch is 85°C.The minimal operating temperature of the multiplexer should be maintained at -40°C.The relevant device specification specifies a maximum supply voltage of 5.5V for the signal switches.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 4V.There are 1 elements used for the mux switch configuration.The digitalswitch relies on 12 circuits to function normally.

FST16292MTDX Features


Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
24 input lines
12 output lines

FST16292MTDX Applications


There are a lot of ON Semiconductor FST16292MTDX Signal Switches / Multiplexers / Decoders applications.

  • Enabling block of memory depending on address in memory chips
  • Make half adder
  • HD surveillance system
  • LVDS
  • Telephone network
  • High-performance memory systems
  • Night vision cameras
  • Enabling different functions units in microprocessor instruction decoding
  • Frequency multiplexing system
  • A robotic vehicle with the metal detector

Write a review

Note: HTML is not translated!
    Bad           Good