FXLA108BQX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 123mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | Other Interface ICs |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FXLA108 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Max Supply Current | 10μA |
| Number of Bits | 8 |
| Propagation Delay | 4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.9 ns |
| Logic Function | Transceiver, Translator |
| Data Rate | 140Mbps |
| Output Characteristics | 3-STATE |
| Interface IC Type | TTL/CMOS TO CMOS TRANSLATOR |
| High Level Output Current | -4μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 4μA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.1V~3.6V |
| Voltage - VCCB | 1.1V~3.6V |
| Output Latch or Register | NONE |
| Height | 750μm |
| Length | 4.5mm |
| Width | 2.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FXLA108BQX Overview
In the 20-WFQFN Exposed Pad package, it is embedded.This package has the format of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.Translator type Voltage Level is assigned to this electrical device.Mounting this electronic component follows the Surface Mount method.There is Bidirectional channel type for this electrical device.Operation is performed at -40°C~85°C TA.In order to achieve its superior flexibility, 1 circuits are used.Ending a transmission line involves 20 terminations.A series of related parts can be derived from the base part number FXLA108.Level translators is powered from a supply voltage of 1.3V.There are 20 pins on it.There are 8 bits in this electronic part.There is a maximum voltage of 3.6V supported.The minimal voltage for operation is 1.1V.From 1.1V~3.6V, the supply rail of the VCCA is configured.1.1V~3.6V is the supply rail configuration on the VCCB.With the Surface Mount method, it is mounted.8 channels are available.Level translators is part of Other Interface ICs.In the absence of external influences, it consumes 10μA of quiescent current.Operating with Auto-Direction Sensing, Power-Off Protection is possible.The supply voltage should be maintained at 3.3V for high efficiency.70MHz is the frequency at which this can be achieved.
FXLA108BQX Features
20-WFQFN Exposed Pad package
1 circuits
20 pins
FXLA108BQX Applications
There are a lot of ON Semiconductor FXLA108BQX voltage translators & level shifters applications.
- Notebook
- ADAS Fusion
- Wearable Health and Fitness Devices
- Routers (Telecom Switching Equipment)
- Personal Electronics
- Extended Product Life Cycle
- One Fabrication Site
- Servers
- Eliminate Slow or Noisy Input Signals
- PMBus
