GAL22V10D-7LJI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 160mA |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 5ns |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-7LJI Overview
A mobile phone network consists of 10macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).28-LCC (J-Lead)is the package in which it resides.There are 10 I/Os on the board.There is a 28terminations set on devices.This electrical part is wired with a terminal position of QUAD.The device is powered by a voltage of 5V volts.It is a part of family [0].Bulkis the packaging method.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.This type of FPGA is a part of the GAL?22V10 series.Chips are programmed with 28 pins.GAL22V10contains its related parts.If high efficiency is desired, the supply voltage should be kept at [0].It is mounted by Surface Mount.This board has 28 pins.There is a maximum supply voltage of 5.5Vwhen the device is operating.With a minimal supply voltage of [0], it operates.It runs on a voltage of 5Vvolts.There is a maximum frequency of 166MHz.A total of 11dedicated inputs are available for detecting the status of input signals.The output is configured with the value [0].It is equipped with 132 product terms.
GAL22V10D-7LJI Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-7LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-7LJI CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- POWER-SAVING MODES
- I2C BUS INTERFACE
- Random logic replacement
- Synchronous or asynchronous mode
- Reset swapping
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- I/O expansion
- Custom shift registers
- Wide Vin Industrial low power SMPS
