HCF4066M013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Type | Bilateral, FET Switches |
| Resistance | 470Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | MOS |
| Voltage - Supply | 3V~20V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HCF4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Voltage | 18V |
| Nominal Supply Current | 20nA |
| Power Dissipation | 200mW |
| Max Supply Current | 5μA |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Turn-Off Delay Time | 15 ns |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 5Ohm |
| Normal Position | NO |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4066M013TR Overview
In order to conserve board space, digital switch is included in the 14-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bilateral, FET Switches.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.When operated with a 3V~20V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 4000B series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 14 range.The base part number is HCF4066, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V volts.A component pin count of 14 is found on this turn signal switch.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Dual, Single.The board is configured with 14 pins.The mounting point is Surface Mount.Normally, 5/15V is powered by a battery.In electronic terms, the digital switch ic is classified as Multiplexer or Switches.It operates with a resistance of 470Ohm.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
HCF4066M013TR Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
HCF4066M013TR Applications
There are a lot of STMicroelectronics HCF4066M013TR Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Injectors
- Speed synchronization of multiple motors in industries
- Steel plants
- Make full adder
- Robotic vehicles
- War field flying robot with a night vision flying camera
- Make half adder
- Data communication
- High-performance memory-decoding applications
