HCPL-7800-500E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HCPL-7800 |
| Output Voltage | 3.8V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 10.9mA |
| Nominal Supply Current | 16mA |
| Slew Rate | 10000 V/μs |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 100 kHz |
| -3db Bandwidth | 100MHz |
| Input Current | 10.86mA |
| Isolation Voltage | 3.75kV |
| Voltage Gain-Min | 7.76 |
| Height Seated (Max) | 4.455mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCPL-7800-500E Overview
It is packaged in an 8-SMD, Gull Wing-case that protects the operational amplifiers from damage. An op amp ic of the Isolation type. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 300μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You can run this op amp ic on 10.9mA . On this instrumentation amplifier, there are 1 circuits that are connected together. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This op amp ic can conduct a minimum voltage gain of 7.76.
HCPL-7800-500E Features
supply voltage of 5V
HCPL-7800-500E Applications
There are a lot of Broadcom Limited HCPL-7800-500E Instrumentational OP Amps applications.
- RF cable systems
- Computer workstations
- Semiconductor detectors
- Blood pressure sensors
- Power generator
- Video data acquisition
- Test and measurement instruments
- Band-stop filter
- Scintillation detectors
- Tablets
