HEF4013BT-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 4000B |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 40MHz |
| Propagation Delay | 60 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 220 ns |
| Logic Function | AND, D-Type |
| Current - Output High, Low | 3.4mA 3.4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
HEF4013BT-Q100J Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. As configured, the output uses Differential. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 3V~15Vis used as the supply voltage. A temperature of -40°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 4000B series. There should be no greater frequency than 40MHzon its output. There are 2 elements in it. The number of terminations is 14. The 4013 family contains this object. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 7.5pF farads at the input. It is mounted in the way of Surface Mount. The 14pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. For normal operation, the supply voltage (Vsup) should be kept above 3V. This D latch consumes 4μA quiescent current at all.
HEF4013BT-Q100J Features
Tape & Reel (TR) package
4000B series
14 pins
HEF4013BT-Q100J Applications
There are a lot of Nexperia USA Inc. HEF4013BT-Q100J Flip Flops applications.
- 2 – Bit synchronous counter
- Reduced system switching noise
- Data transfer
- Patented noise
- Storage Registers
- Bus hold
- Shift registers
- Pattern generators
- Balanced Propagation Delays
- ESD protection
