HI3-0201HS-5Z
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | HI-201 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 0.9Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 50ns, 50ns |
| Charge Injection | 10pC |
| Crosstalk | -86dB @ 100kHz |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
HI3-0201HS-5Z Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. Through Hole is where this multiplexer is located. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~75°C TA. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NC switching circuits. 4 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with HI-201.
HI3-0201HS-5Z Features
1 Channels
Switch Circuit: SPST - NC
HI3-0201HS-5Z Applications
There are a lot of Renesas Electronics America Inc. HI3-0201HS-5Z Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Medical
- Residential Gateways, Home Gateway/Router
- Communication systems
- SONET/SDH ADM
- High reliability control systems
- Sample hold systems
- Cell phones
- High-Voltage
- Low-Voltage
