HI3-0509-5
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Supply Voltage-Min (Vsup) | 10V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 12pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 250ns, 250ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 20 Ω |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -10V |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
HI3-0509-5 Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. It is mounted in the position Through Hole. 4:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around 0°C~75°C TA. In total, there have been 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. This analog switch ic needs a voltage of 10V as its minimum supply voltage.
HI3-0509-5 Features
4 Channels
Switch Circuit: SP4T
HI3-0509-5 Applications
There are a lot of Rochester Electronics, LLC HI3-0509-5 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Wireless Local Loop
- SONET/SDH ADM
- 65 V DACs
- Cable PC
- Multi-Line E1 Interface Cards
- Battery-powered systems
- Battery Powered Instruments
- T1/E1 Terminals
- SDH/SONET multiplexers
