HI9P0201HS-9Z

Analog Switches BREAK-BEFORE-MAKE 16 Pins 15V SOIC

Manufacturer: Intersil (Renesas Electronics America)
Nocochips NO: 391-HI9P0201HS-9Z
Package: SOIC
Datasheet: PDF
Stock: 221
Description: Analog Switches BREAK-BEFORE-MAKE 16 Pins 15V SOIC(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Package / Case	SOIC
Number of Pins	16
Packaging	Bulk
Published	2000
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3
Number of Terminations	16
ECCN Code	EAR99
Resistance	50Ohm
Terminal Finish	Matte Tin (Sn) - annealed
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	15V
Temperature Grade	INDUSTRIAL
Number of Channels	1
Max Supply Voltage	36V
Operating Supply Current	4.5mA
Nominal Supply Current	4.5mA
Max Supply Current	10mA
Number of Bits	4
Throw Configuration	SPST
Turn On Delay Time	50 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Dual Supply Voltage	15V
Off-state Isolation-Nom	72 dB
On-state Resistance Match-Nom	0.9Ohm
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	30Ohm
Normal Position	NC
Height Seated (Max)	2.65mm
Length	10.3mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

HI9P0201HS-9Z Overview

Shipping overseas is convenient due to the electrical component's packing in SOIC. Advanced packaging method Bulk is used to provide high reliability. Total terminations are 16. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. As far as internal resistance is concerned, it has 50Ohm. You can find the functions of the 16 pins in the datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 36V to a switch device. A analog switch ic that has a cost-effective Dual, Single supply type. An operating current of 4.5mA would be sufficient for this switch device. The analogue multiplexer may be damaged if voltage is greater than 10mA. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. There is a voltage range of 15V operating voltages for the electrical part. The switches should not operate in an environment where the temperature is higher than 85°C. It has a Drain to Source resistance of 30Ohm ohms. 4-bit conductivity is possible.