ICL7665ACPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIP, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7665 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 3μA |
| Power Dissipation | 727mW |
| Output Current | 25mA |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Reset Timeout | <1ms Minimum |
| Rise Time | 600ns |
| Min Reset Threshold Voltage | 3.3V |
| Max Reset Threshold Voltage | 5.5V |
| Threshold Voltage | +1.3V |
| Undervoltage Threshold | 1.225V |
| Overvoltage Threshold | 1.375V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7665ACPA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tube-packaging is used. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 2 channels, each of which can be used independently. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Packages are specified to have an average peak reflow temperature of 260. In a 5V supply voltage, the power management conducts. Power management conducts at a voltage of 2. The mount is provided by DIP, Through Hole. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 8 pins in it. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. There should be no more than 16V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 3μA for the power management. To find similar IC managements from the manufacturer, you can always search by ICL7665. This power management requires 5V power to work. The maximum supply temperature voltage supervisor can handle is 15μA.
ICL7665ACPA+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
3μA operating supply current
ICL7665ACPA+ Applications
There are a lot of Maxim Integrated ICL7665ACPA+ Voltage Supervisors applications.
- Battery cars
- Power distribution systems of CCU
- Efficient information transmission
- Sensitive sensors
- Data storage applications
- Detection of phase sequence
- Embedded computing
- Magnetic resonance imaging
- Power distribution systems of ICU
- Rechargeable batteries
