IDT7202LA12SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7202LA12SO Overview
You can find FIFO memory chip in package SOIC .Memory IC's recommended mounted way is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .A total of 28 terminations are contained within FIFO means.In order to operate it, it requires 80mA volts of current.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO type memory IC is present in the FIFO memory chip.Currently, it has 28 pins.In normal circumstances, the component has 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.A FIFO memory IC's maximum supply voltage of 5.5V is set for Vsup.To ensure normal operation, make sure the supply voltage (Vsup) is above 4.5V .The clock of the FIFO memory IC runs at 50MHz frequency.
IDT7202LA12SO Features
FIFOs category
Clock frequency of 50MHz
IDT7202LA12SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7202LA12SO FIFOs Memory applications.
- SPI Bus Flash Memory Device
- PC peripheral
- Consumer
- Tape controllers
- IP Camera Buffer
- Down-Hole Energy Drilling
- Emulators
- Programmable Logic Controller
- Computers
- Video time base correction
