banner_page

INA125U

1 Channels 12mA per Channel 10nA 100 dB Instrumentational OP Amps 5V 2.7V~36V ±1.35V~18V INA125 16 Pins 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA125U
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 888
  • Description: 1 Channels 12mA per Channel 10nA 100 dB Instrumentational OP Amps 5V 2.7V~36V ±1.35V~18V INA125 16 Pins 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Resistance 100GOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Base Part Number INA125
Pin Count 16
Operating Supply Voltage 5V
Number of Elements 2
Number of Channels 1
Operating Supply Current 460μA
Nominal Supply Current 325μA
Quiescent Current 460μA
Slew Rate 0.2V/μs
Amplifier Type Instrumentation
Common Mode Rejection Ratio 100 dB
Current - Input Bias 10nA
Voltage - Supply, Single/Dual (±) 2.7V~36V ±1.35V~18V
Output Current per Channel 12mA
Input Offset Voltage (Vos) 250μV
Bandwidth 150 kHz
Gain Bandwidth Product 150 kHz
Neg Supply Voltage-Nom (Vsup) -15V
Voltage Gain 80dB
Voltage - Input Offset 50μV
Gain 10000 dB
-3db Bandwidth 0.15MHz
Dual Supply Voltage 15V
Voltage Gain-Nom 10
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA125U Overview


In order to protect the op amps, a 16-SOIC (0.154, 3.90mm Width) case is used. This is a Instrumentation type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 16. In total, there are 16 pins on this op amp ic. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. There are 16 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 250μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 460μA . The voltage gain should stay at 80dB. 1 channels are available on the instrumentation amplifier. Op amp has total of 2 elements. The operating supply voltage of instrumentation amplifier is rated 5V voltage. There is an 460μA quiescent current in linear amplifier. It is important to keep the resistance within the 100GOhm range of the linear amplifier.

INA125U Features


16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm

INA125U Applications


There are a lot of Texas Instruments INA125U Instrumentational OP Amps applications.

  • Radar
  • Signal amplification
  • Digital cameras
  • Medical imaging
  • Power control
  • Multiplication circuits
  • Weighing systems
  • Scintillation detectors
  • Industrial applications including automation
  • Weak signal detection

Write a review

Note: HTML is not translated!
    Bad           Good