INA170EA/250G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA170 |
| Function | Current Monitor |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 125μA |
| Voltage - Input | 2.7V~60V |
| Nominal Supply Current | 75μA |
| Accuracy | ±0.5% |
| Max Output Voltage | 40V |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 100 dB |
| Max Input Voltage | 60V |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 400 kHz |
| Sensing Method | High-Side |
| Input Bias Current | 10μA |
| Number of Amplifiers | 1 |
| Height | 970μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA170EA/250G4 Overview
Package Tape & Reel (TR) includes buck boost converter.In the same manner as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), voltage regulator is packaged.A mounting hole is provided for Surface Mount to mount this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~85°C.Current regulator is possible to use a voltage input of 2.7V~60V for the input.Among the INA170 family of products.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. It is mounted by Surface Mount on this current regulator.As long as 40V is supplied with the maximal voltage, the buck boost converter will work.In order to include these current regulations, there is a part called Operational Amplifier that includes them.The buck boost converter operates with a minimum supply voltage of 2.7V.It has an Amplifier type of OPERATIONAL AMPLIFIER.As soon as 125μA reaches the operating supply current, the boost converter begins to operate.There are 2 elements in current regulation.For high efficiency, the supply voltage should be maintained at 28V.60V offers maximum flexibility due to its maximum input voltage.It is important to note that the resistance of this electrical dc to dc converter is 10GOhm (Ω).
INA170EA/250G4 Features
Tape & Reel (TR) package
INA170 family
The maximal supply voltage of 40V
2 elements
INA170EA/250G4 Applications
There are a lot of Texas Instruments INA170EA/250G4 Current Regulation/Managements applications.
- Level translating
- Vehicle dynamic controls
- Over current monitor
- Over-current protection
- Diesel injection controls
- DC-to-dc converters
- Over current monitor
- Power management
- Smart battery packs
- Battery chargers
