INA198AIDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | INA198 |
| Function | Current Monitor |
| Number of Elements | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 700μA |
| Quiescent Current | 700μA |
| Accuracy | ±3% |
| Min Input Voltage | -16V |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Max Input Voltage | 80V |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 200 kHz |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Settling Time | 2 μs |
| Sensing Method | High-Side |
| Input Bias Current | 16μA |
| Number of Amplifiers | 1 |
| Voltage Gain-Nom | 100 |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA198AIDBVT Overview
Buck boost converter is embedded in the Cut Tape (CT) package.Voltage regulator is packaged in the way of SC-74A, SOT-753.Mounted by Surface Mount, this current regulator is a semiconductor.The operating temperature should not exceed -40°C~125°C.The input voltage of -16V~80V is supported as an input voltage.In the INA198 family, current regulator is a member.There are 5 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. It supports the maximal supply voltage of 18V.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.A minimum supply voltage of 2.7V is required for its operation.The Amplifier type of this electrical buck boost converter is OPERATIONAL AMPLIFIER.900μA is the operating supply current provided for its operation.In this case, current regulation consists of 2 elements.The maximal input voltage of 80V makes it feature maximum design power converter flexibility.40dB voltage gains represent the simple ratio of an output voltage to its input voltage.A minimal input voltage allows -16V to feature maximum design flexibility.Regardless of external influence, it consumes 700μA of quiescent current.
INA198AIDBVT Features
Cut Tape (CT) package
INA198 family
The maximal supply voltage of 18V
2 elements
INA198AIDBVT Applications
There are a lot of Texas Instruments INA198AIDBVT Current Regulation/Managements applications.
- Industrial applications current measurement
- Current sensing
- Suspension controls
- Engine management
- DC-to-dc converters
- Over-current measurement
- Vehicle dynamic controls
- Battery management
- DC motor control
- Over current monitor
