INA199A3DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Output Type | Voltage |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.3V~26V |
| Nominal Supply Current | 115μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 14 kHz |
| Gain Bandwidth Product | 14 kHz |
| Supply Current-Max (Isup) | 5mA |
| Voltage Gain | 46.02dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199A3DCKR Overview
There is a package called Tape & Reel (TR) that contains buck boost converter.Voltage regulator is packaged in the way of 6-TSSOP, SC-88, SOT-363.Surface Mount is used to mount this current regulator on the board.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.The input voltage of -0.3V~26V is supported as an input voltage.6 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.There are two types of INA199s in this family.Computers and other communication constant current regulators use 6 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount.Providing that it is powered by a 5VV power supply, the constant current should work without any problems.This power converter employs an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Channels are becoming stronger/weaker based on the following statistics: 1.As long as 26V is supplied with the maximum voltage, it is supported.In order for it to operate, 2.5V has to be the minimum supply voltage.It reaches 65μA when the operating supply current is supplied.It reaches 5mA when the maximum supply current (Isup) that can be supplied for current regulation's operation can be obtained.Essentially, current regulation is made up of 1 elements.In current regulations, 46.02dB voltage gains can be seen as a simple ratio of the output voltage to the input voltage.
INA199A3DCKR Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
1 elements
INA199A3DCKR Applications
There are a lot of Texas Instruments INA199A3DCKR Current Regulation/Managements applications.
- DC-to-dc converters
- Over-current protection
- Level translating
- Automotive current measurement
- Smart battery packs
- Industrial applications current measurement
- Over current monitor
- Motor controls
- Vehicle dynamic controls
- Over current monitor
