banner_page

INA200AIDG4

8 Terminations12V 8 Pin INA200 Current regulator-40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA200AIDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 144
  • Description: 8 Terminations12V 8 Pin INA200 Current regulator-40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Sensing Method High-Side
Input Offset Voltage-Max 2500μV
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 12V
Base Part Number INA200
Function Current Monitor
Output Type OPEN-DRAIN
Number of Channels 1
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Voltage - Input -16V~80V
Nominal Supply Current 1.85mA
Accuracy ±3.5%
Response Time 1300 ns
Amplifier Type COMPARATOR

INA200AIDG4 Overview


Buck boost converter is embedded in the Tube package.Voltage regulator is packaged in the way of 8-SOIC (0.154, 3.90mm Width).Surface Mount mounts this current regulator.The operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage of -16V~80V as an input voltage.8 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.Among the INA200 family of products.Several pronged contacts are used in computer interfaces as 8 pins.Surface Mount is responsible for mounting this current regulator.In order for the constant current to work, it should be powered by a 12VV power source, which is found in most 12VV power supplies.The number of channels is growing strong/weak: 1.18V's maximum supply voltage can be supported by this buck boost converter.In this case, these current regulations are included as part of a part called Operational Amplifier.As long as the supply voltage is lower than 2.7V, it will operate correctly.An amplifier of this type is COMPARATOR.

INA200AIDG4 Features


Tube package
INA200 family
The maximal supply voltage of 18V

INA200AIDG4 Applications


There are a lot of Texas Instruments INA200AIDG4 Current Regulation/Managements applications.

  • Smart battery packs
  • Engine management
  • Over current monitor
  • Suspension controls
  • Power supply current measurement
  • Current sensing
  • Industrial applications current measurement
  • DC-to-dc converters
  • Over current monitor
  • DC motor control

Write a review

Note: HTML is not translated!
    Bad           Good