INA203AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA203 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 500 kHz |
| Average Bias Current-Max (IIB) | 0.015μA |
| Bias Current-Max (IIB) @25C | 16μA |
| Sensing Method | High-Side |
| Common-mode Reject Ratio-Min | 100 dB |
| Voltage Gain-Nom | 20 |
| Common Mode Voltage-Max | 80V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA203AIDR Overview
Including buck boost converter in package Tape & Reel (TR) is a good idea.14-SOIC (0.154, 3.90mm Width) is the way in which voltage regulator is packaged.The current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -16V~80V for the input.An example of this is the 14 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.As part of the INA203 family, current regulator belongs to this class.As part of a signal interface in a computer or other communication constant current regulator, 14 pins are pronged contacts.The current regulator is mounted on the Surface Mount axis.Providing that it is powered by a 12VV power supply, the constant current should work without any problems.The output current of 1mA makes it feature maximum design flexibility.A significant number of channels are growing strongly/weakly: 2.18V's maximum supply voltage can be supported by this buck boost converter.This part is included in Operational Amplifier.A minimum supply voltage of 2.7V is required for its operation.The amplifier type of this electrical buck boost converter is COMPARATOR, which means that it is an amplifier.
INA203AIDR Features
Tape & Reel (TR) package
INA203 family
The maximal supply voltage of 18V
INA203AIDR Applications
There are a lot of Texas Instruments INA203AIDR Current Regulation/Managements applications.
- Industrial applications current measurement
- Smart battery packs
- Power supply current measurement
- Engine management
- Over-current protection
- Transmission controls
- Over-current measurement
- DC motor control
- Programmable current source
- Power management
