INA204AIDGST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA204 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 300 kHz |
| Unity Gain BW-Nom | 300 kHz |
| Average Bias Current-Max (IIB) | 0.015μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Voltage Gain-Nom | 50 |
| Common Mode Voltage-Max | 80V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA204AIDGST Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).oltage regulator is packaged in such a way that 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) would understand.Surface Mount mounts this current regulator.There should be no temperature above -40°C~125°C at the time of operation.An input voltage wcurrent regulatorh a value of -16V~80V may be used as an input voltage.An example of this is the 10 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Current regulator belongs to INA204 family.In a computer or other communication constant current regulator, 10 pins are pronged contacts that provide a signal interface.There is a Surface Mount mounting bracket on the back of this current regulator.In order to make this constant current work, it needs to be powered by 12VV.In addition to the maximum design flexibility that 1mA provides, its output current is also quite high.It supports the maximal supply voltage of 18V.In order to include these current regulations, there is a part called Operational Amplifier that includes them.As long as the supply voltage is lower than 2.7V, it will operate correctly.The Amplifier type of this electrical buck boost converter is COMPARATOR.Power is supplied by 12V batteries.
INA204AIDGST Features
Tape & Reel (TR) package
INA204 family
The maximal supply voltage of 18V
12V power supplies
INA204AIDGST Applications
There are a lot of Texas Instruments INA204AIDGST Current Regulation/Managements applications.
- Current sensing
- Motor controls
- Engine management
- Vehicle dynamic controls
- Level translating
- Battery chargers
- Over-current measurement
- Power management
- Industrial applications current measurement
- DC-to-dc converters
