INA207AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA207 |
| Function | Current Monitor |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | OPEN-DRAIN |
| Operating Supply Voltage | 18V |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 18V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 300 kHz |
| Sensing Method | High-Side |
| Input Bias Current | 10nA |
| Number of Amplifiers | 3 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA207AID Overview
Including buck boost converter in package Tube is a good idea.14-SOIC (0.154, 3.90mm Width) is the way in which voltage regulator is packaged.This electronic part is mounted in the way of Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -16V~80V for the input.There are two types of INA207s in this family.Several pronged contacts are used in computer interfaces as 14 pins.It is mounted on a Surface Mount-axis by this current regulator.In order to make this constant current work, it needs to be powered by 12VV.As a result of 1mA's output current, it offers maximum design flexibility.Supports the maximum supply voltage of 2.7V.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.The buck boost converter operates with a minimum supply voltage of 18V.This electrical buck boost converter is an amplifier of type COMPARATOR.For optimum efficiency, the supply voltage should be kept at 18V at all times.It is configured with 1 output.
INA207AID Features
Tube package
INA207 family
The maximal supply voltage of 2.7V
1 output
INA207AID Applications
There are a lot of Texas Instruments INA207AID Current Regulation/Managements applications.
- Power supply current measurement
- Automotive current measurement
- Transmission controls
- Level translating
- Smart battery packs
- Over-current protection
- Suspension controls
- Over current monitor
- Motor controls
- Battery management
