Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
Contact Plating | Gold |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Number of Pins | 10 |
Operating Temperature | -40°C~125°C |
Packaging | Cut Tape (CT) |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 2 (1 Year) |
Number of Terminations | 10 |
ECCN Code | EAR99 |
HTS Code | 8542.39.00.01 |
Subcategory | Power Management Circuits |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Base Part Number | INA226 |
Function | Current Monitor |
Power Supplies | 3.3V |
Max Supply Voltage | 5.5V |
Min Supply Voltage | 2.7V |
Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
Voltage - Input | 0V~36V |
Nominal Supply Current | 330μA |
Current - Output | 10mA |
Accuracy | ±0.02% |
Common Mode Rejection Ratio | 140 dB |
Input Offset Voltage (Vos) | 2.5μV |
Bandwidth | 3.5 kHz |
Supply Current-Max (Isup) | 0.42mA |
Threshold Voltage | 2 |
Sensing Method | High/Low-Side |
Input Bias Current | 10μA |
Min Supply Voltage (DC) | 2.7V |
Height | 1.07mm |
Length | 3mm |
Width | 3mm |
Thickness | 1.02mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
An interface that is I2C? or SMBUS compliant, the INA226AIDGSR is a current shunt and power monitor. Shunt voltage drop and bus supply voltage are both monitored by the gadget. Direct readouts of current in amps and power in watts are possible thanks to programmable calibration value, conversion timings, and averaging, as well as an internal multiplier.
Independent of the supply voltage, the INA226AIDGSR measures current on common-mode bus voltages that range from 0 V to 36 V. With a single supply voltage ranging from 2.7 to 5.5 volts, the device may run while using a typical supply current of 330 μA. A maximum of 16 programmable addresses are available on the I2C-compatible interface, and the device is specified to operate between -40°C and 125°C.
Configurable Averaging Options
16 Programmable Addresses
Operates from 2.7-V to 5.5-V Power Supply
10-Pin, DGS (VSSOP) Package
High Accuracy:
– 0.1% Gain Error (Max)
– 10 μV Offset (Max)
Reports Current, Voltage, and Power
High-Side or Low-Side Sensing
Senses Bus Voltages From 0 V to 36 V
Power Management
Battery Chargers
Power Supplies
Test Equipment
Computing
Telecom Equipment
Servers