banner_page

INA271AIDR

8 Pin INA271 Current regulator-40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA271AIDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 611
  • Description: 8 Pin INA271 Current regulator-40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Termination SMD/SMT
ECCN Code EAR99
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Base Part Number INA271
Function Current Monitor
Number of Elements 3
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Operating Supply Current 950μA
Voltage - Input -16V~80V
Nominal Supply Current 700μA
Accuracy ±1%
Slew Rate 1 V/μs
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 80 dB
Input Offset Voltage (Vos) 2.5mV
Bandwidth 130 kHz
Voltage Gain 26.02dB
Power Supply Rejection Ratio (PSRR) 106.02dB
Sensing Method High-Side
Input Bias Current 16μA
Number of Amplifiers 1
Voltage Gain-Nom 20
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 20 hours ago)

INA271AIDR Overview


Buck boost converter is included in the package Tape & Reel (TR).8-SOIC (0.154, 3.90mm Width) is the way in which voltage regulator is packaged.In this case, Surface Mount holds the current regulator in place.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.An input voltage wcurrent regulatorh a value of -16V~80V may be used as an input voltage.INA271 family is associated with current regulator.In a computer or other communication constant current regulator, 8 pins are pronged contacts that provide a signal interface.Using Surface Mount as a mounting system, this current regulator is mounted.As long as 18V is supplied with the maximum voltage, it is supported.There are several current regulations that are included in the Operational Amplifier part, which is part of the entire assembly.In order for it to operate, 2.7V has to be the minimum supply voltage.It has an Amplifier type of OPERATIONAL AMPLIFIER.During its operation, 950μA is reached by the operating supply current.Current regulation consists of 3 elements.There are 26.02dB voltage gains, which are?the simple ratio of the output voltage to the input voltage of a current regulation.

INA271AIDR Features


Tape & Reel (TR) package
INA271 family
The maximal supply voltage of 18V
3 elements

INA271AIDR Applications


There are a lot of Texas Instruments INA271AIDR Current Regulation/Managements applications.

  • Automotive current measurement
  • Over current monitor
  • Current sensing
  • Over-current measurement
  • Vehicle dynamic controls
  • Smart battery packs
  • Power supply current measurement
  • Transmission controls
  • Power management
  • Suspension controls

Write a review

Note: HTML is not translated!
    Bad           Good