banner_page

INA283AID

8 Terminations8 Pin INA283 Current regulatorZero-Drift Series -40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA283AID
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 512
  • Description: 8 Terminations8 Pin INA283 Current regulatorZero-Drift Series -40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tube
Series Zero-Drift
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Resistance 6kOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number INA283
Function Current Monitor
Qualification Status Not Qualified
Number of Elements 1
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Operating Supply Current 900μA
Voltage - Input -14V~80V
Max Supply Current 900μA
Accuracy ±0.4%
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 120 dB
Input Offset Voltage (Vos) 70μV
Bandwidth 10 kHz
Voltage Gain 46.02dB
Power Supply Rejection Ratio (PSRR) 110.46dB
Sensing Method High/Low-Side
Input Bias Current 25μA
Voltage Gain-Nom 200
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA283AID Overview


The package includes buck boost converter in version Tube.8-SOIC (0.154, 3.90mm Width) is the way in which voltage regulator is packaged.A mounting hole is provided for Surface Mount to mount this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.The input voltage of -14V~80V is supported as an input voltage.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Current regulator belongs to INA283 family.8-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.It is mounted by Surface Mount on this current regulator.As a result, it allows 18V to be supplied with its maximum voltage.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.With the minimum supply voltage of 2.7V, it is able to operate.There are FPGAs of this type in the Zero-Drift series.The amplifier type of this electrical buck boost converter is OPERATIONAL AMPLIFIER, which means that it is an amplifier.900μA is the operating supply current provided for its operation.Current regulation consists of 1 elements.As 900μA has a maximal supply current, its current regulator's design flexibility is maximi900μAed.Current regulations have 46.02dB voltage gains, which are the ratio of output voltage to input voltage.The resistance of the electrical dc to dc converter is 6kOhm (Ω).

INA283AID Features


Tube package
INA283 family
The maximal supply voltage of 18V
Zero-Drift series
1 elements

INA283AID Applications


There are a lot of Texas Instruments INA283AID Current Regulation/Managements applications.

  • Current sensing
  • Power management
  • Automotive current measurement
  • DC motor control
  • Programmable current source
  • Transmission controls
  • Battery management
  • Battery chargers
  • Engine management
  • Over current monitor

Write a review

Note: HTML is not translated!
    Bad           Good