banner_page

INA285AQDGKRQ1

8 Terminations5V 8 Pin INA285 Current regulatorAutomotive, AEC-Q100 Series -40°C~125°C


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA285AQDGKRQ1
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 908
  • Description: 8 Terminations5V 8 Pin INA285 Current regulatorAutomotive, AEC-Q100 Series -40°C~125°C (Kg)

Details

Tags

Parameters
Voltage Gain-Nom 1000
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number INA285
Function Current Monitor
Voltage - Input -14V~80V
Accuracy ±0.4%
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 140 dB
Unity Gain BW-Nom 2 kHz
Sensing Method High/Low-Side
Input Offset Voltage-Max 70μV
Common-mode Reject Ratio-Min 120 dB

INA285AQDGKRQ1 Overview


In package Tape & Reel (TR), buck boost converter is included.8-TSSOP (0.173, 4.40mm Width) is the way in which voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.There should be no temperature above -40°C~125°C at the time of operation.The input voltage of -14V~80V can be supported by this voltage regulator.The 8 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.Current regulator belongs to INA285 family.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. Using Surface Mount as a mounting system, this current regulator is mounted.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.In order to include these current regulations, there is a part called Operational Amplifier that includes them.This type of FPGA is found in the Automotive, AEC-Q100 series.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.

INA285AQDGKRQ1 Features


Tape & Reel (TR) package
INA285 family
Automotive, AEC-Q100 series

INA285AQDGKRQ1 Applications


There are a lot of Texas Instruments INA285AQDGKRQ1 Current Regulation/Managements applications.

  • Power management
  • Smart battery packs
  • Industrial applications current measurement
  • Over current monitor
  • Vehicle dynamic controls
  • DC motor control
  • Diesel injection controls
  • Level translating
  • Power supply current measurement
  • Automotive current measurement

Write a review

Note: HTML is not translated!
    Bad           Good