INA826AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100kOhm |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA826 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Output Current | 16mA |
| Max Supply Current | 200μA |
| Quiescent Current | 200μA |
| Slew Rate | 1V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 35nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.065μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Voltage - Input Offset | 40μV |
| -3db Bandwidth | 1MHz |
| Input Voltage Noise Density | 18nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.0005% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA826AID Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a Instrumentation type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. 8 pins are available on the instrumentation amplifier. Op amp rates 150μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 200μA. It is a member of the 60dB's 60dB family. There are 1 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. 200μA quiescent currents are flowing through buffer op amp. Instrumentation amplifier resistance should stay within the range of 100kOhm.
INA826AID Features
8 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100kOhm
INA826AID Applications
There are a lot of Texas Instruments INA826AID Instrumentational OP Amps applications.
- Radar
- Test and measurement instruments
- Scintillation detectors
- Industrial control system
- single/dual op amp sum and difference circuits
- High gain DC amplifier
- Power generator
- Voltage regulation circuit
- Measurements of Wheatstone bridge
- Ultrasound transducers
