banner_page

IR21571SPBF

PMIC IR21571SPBF 16 Pin 45.5kHz~50.5kHz 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-IR21571SPBF
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 249
  • Description: PMIC IR21571SPBF 16 Pin 45.5kHz~50.5kHz 16-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~125°C
Packaging Tube
Published 2005
Part Status Discontinued
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
Termination SMD/SMT
ECCN Code EAR99
Type Ballast Controller
Max Power Dissipation 1W
Voltage - Supply 10.5V~16.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Frequency 45.5kHz~50.5kHz
Base Part Number IR21571SPBF
Output Voltage 25V
Max Output Current 250mA
Operating Supply Voltage 15.6V
Input Voltage-Nom 14V
Operating Supply Current 5.5mA
Nominal Supply Current 10mA
Output Current 500mA
Max Supply Current 10mA
Max Output Voltage 25V
Rise Time 150ns
Fall Time (Typ) 100 ns
Min Output Voltage 10V
Switcher Configuration PUSH-PULL
Number of Drivers 2
Dimming No
Height 1.5mm
Length 9.98mm
Width 3.99mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

IR21571SPBF Overview


Materials in compliance with Tube's specifications.Electronics manufacturers recogni16-SOIC (0.154, 3.90mm Width)e the 16-SOIC (0.154, 3.90mm Width)'s low package cost.Surface Mount mounts it on the PCB.As a standard grade, it's referred to as Type Ballast Controller.The device is powered by a voltage to ensure normal operation.The -40°C~125°C setting should always be used.However, accuracy can still be maintained at 45.5kHz~50.5kHz frequency.In the device, the best part has a number of IR21571SPBFs.There are 16 terminations on it.Devices run on 1 functions.The supply current of the device is set to 5.5mA.There is no change to the pin number of the component.Surface Mount-direction mounting is done.It is set to 500mA in this case.It operates with 15.6V voltage.It is possible to control this device using 25V's output.The maximum supply temperature it can handle is 10mA.You can use up to 2 eligible receivers/drivers at once on the field.Generally, it works at maximum 250mA output current.

IR21571SPBF Features


Mounting type of Surface Mount
Operating supply voltage of 15.6V

IR21571SPBF Applications


There are a lot of Infineon Technologies IR21571SPBF Lighting Controllers applications.

  • Smoothing
  • Frequency converters
  • Decoupling or bypassing
  • Noise filtering
  • To reduce power noise & signal noise
  • Motor start
  • DC/DC, DC/AC, and AC/AC converters
  • Power factor correction (PFC)
  • Computer motherboards
  • DC link

Write a review

Note: HTML is not translated!
    Bad           Good