IR21592PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Ballast Controller |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1.6W |
| Voltage - Supply | 12V~16.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Frequency | 18kHz~95kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR21592PBF |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Operating Supply Voltage | 12.5V |
| Input Voltage-Nom | 14V |
| Power Supplies | 14V |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 1.6W |
| Output Current | 500mA |
| Input Voltage (Max) | 15.6V |
| Rise Time | 120ns |
| Fall Time (Typ) | 65 ns |
| Switcher Configuration | PUSH-PULL |
| Number of Drivers | 2 |
| Dimming | Yes |
| Height | 5.33mm |
| Length | 21.33mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR21592PBF Overview
Tube's materials have been used in the packaging.Package costs are low on the 16-DIP (0.300, 7.62mm), which is recogni16-DIP (0.300, 7.62mm)ed by electronics manufacturers.PCB mounting is done using Through Hole.Type Ballast Controller applies to standard grade applications.The device is powered by a voltage to ensure normal operation.Always keep it at -40°C~125°C.It can still perform accurately at 18kHz~95kHz frequency.The device's best part has a number of IR21592PBF in it.There are 16 terminations on it.1 functions are used by the device.It is set to 10mA for the supply current.In this case, 16 is the pin number for the component.It is necessary to use a source of 14V at all times in order to power the component constantly.Switching Regulator or Controllers Subcategory is appropriate for the item.Through Hole-direction mounting is done.Here, 500mA is the output current.An input voltage maximum of 15.6V is available.14V supplies are installed on the device.For it to work, 12.5V voltage is required.It is possible to control this device using 20V's output.It is possible to use up to 2 receivers/drivers simultaneously in the field.
IR21592PBF Features
Mounting type of Through Hole
Supply voltage of 14V
Switching Regulator or Controllers subcategory
Operating supply voltage of 12.5V
IR21592PBF Applications
There are a lot of Infineon Technologies IR21592PBF Lighting Controllers applications.
- Power line buffering
- Spot welding
- DC buffering
- Motor control
- Signal decoupling & power bypass
- Audio crossover
- Voltage doubling
- DC link
- Noise filtering
- Smoothing
