IR21834SPBF
| Parameters | |
|---|---|
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR21834SPBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 2.3A |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1W |
| Output Current | 1.9A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 330 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Max Output Voltage | 20V |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 220 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 2.3A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.7V |
| Turn Off Time | 0.33 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 8.74mm |
IR21834SPBF Overview
A higher level of flexibility is provided by its 14-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.The device is mounted in the direction of Surface Mount.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.IGBT, N-Channel MOSFET is the gate type used for this design.In this device, temperatures must not exceed -40°C~150°C TJ.The input type is Inverting, Non-Inverting.Mosfet driver is based on 14 terminations.Numerous related parts can be found under its base part number IR21834SPBF.In this case, Surface Mount indicates how the device is mounted.The pins are configured with 14 when designing the chip.A supply voltage of 15V is required for operation.In the maximum case, the output current can be limited to 2.3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A boot strap voltage of 600V is the maximum possible high-side voltage.The basis of this system consists of 2 outputs.1.9A is the maximum output current supported by the device.Based on its maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 1.6mA in order to achieve greater stabilMosfet gate driversy.Mosfet gate drivers outputs 620V as voltage.In general, it is recommended to keep the maximum output voltage at 20V.
IR21834SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR21834SPBF Applications
There are a lot of Infineon Technologies IR21834SPBF gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- Motor Control
- Industrial Motor Inverter - Power Tools, Robotics
- Automotive Applications
- serial peripheral interface (SPI), I2C
- General Purpose 3-Phase Inverter
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for controller area network (CAN),
- Isolated Gate Driver Supplies
- Portable Navigation Devices
