IR2235JPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | 125°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR2235JPBF |
| JESD-30 Code | S-PQCC-J32 |
| Qualification Status | Not Qualified |
| Output Voltage | 300mV |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Nominal Supply Current | 100μA |
| Power Dissipation | 2W |
| Output Current | 200mA |
| Input Type | Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 150ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 950 ns |
| Rise / Fall Time (Typ) | 90ns 40ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 1 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.95 μs |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height | 4.572mm |
| Length | 16.6624mm |
| Width | 16.6624mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2235JPBF Overview
For greater flexibility, its 44-LCC (J-Lead), 32 Leads package is used.Gate drivers is packaged in the way of Tube.Gate drivers incorporates wGate driversh 6 drivers for Gate driverss configuration.The device is mounted in the direction of Surface Mount.By using 10V~20V supply voltage, it is able to demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.There is a temperature range for this device of 125°C TJ.Inverting is used as its input type.The configuration starts with 32 terminations.There are numerous related parts listed under its base part number IR2235JPBF.Surface Mount is the way it takes to mount the device.As a result, it is configured with 44 pins when it is designed.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.There is an output current limit of 500mA for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There can be a voltage up to 1200V on the high-side (Bootstrap).Mosfet gate drivers supports a current output of 200mA.This device has a maximum power dissipation of 2W, indicating that it is capable of reducing power loss without overheating.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.When this voltage is produced, it is marked as 300mV.The system operates at a resistance of 100Ohm.
IR2235JPBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 2W
Resistance of 100Ohm
IR2235JPBF Applications
There are a lot of Infineon Technologies IR2235JPBF gate drivers applications.
- Telecom switch mode power supplies
- Line drivers
- Isolated switch mode power supplies (SMPS)
- LCD/LCoS/DLP portable and embedded pico projectors
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Supplies for Motor Control
- DC-DC Converters
- Portable computers
- White Goods - Air Conditioner, Washing Machine,
