IRS21814PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS21814PBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Nominal Supply Current | 240μA |
| Power Dissipation | 1.6W |
| Output Current | 1.9A |
| Max Supply Current | 240μA |
| Propagation Delay | 330 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.33 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 20.1676mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21814PBF Overview
In order to increase flexibility, the package 14-DIP (0.300, 7.62mm) is used.A package of Tube has been used.In the direction of Through Hole, gate drivers is mounted.By using 10V~20V supply voltage, it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.The input type for this program is Non-Inverting.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.There are various related parts under its base part number IRS21814PBF.Mosfet driver is mounted using the Through Hole method.Mosfet driver is configured wMosfet driverh 14 pins when designing.The device is specifically designed to function with a supply voltage of 15V V.The interface IC is referred to as BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is a maximum output current of 2.3A that can be achieved.Several electronic components are included in its subcategory of MOSFET Drivers.A boot strap voltage of 600V is the maximum possible high-side voltage.The basis has 2 integrated outputs.This device is capable of delivering 1.9A current.According to its maximum power dissipation, 1.6W is capable of conducting and transferring a large amount of power without overheating.As a precaution, make sure the supply current is kept at 240μA.The power supply 15V of the product solves the power supply problem for a variety of applications.In this case, the voltage output is 20V.
IRS21814PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
IRS21814PBF Applications
There are a lot of Infineon Technologies IRS21814PBF gate drivers applications.
- Motor controllers
- Topologies
- Dual-Battery Systems
- Broadcast equipment
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Refrigerator
- Portable computers
- Commercial air-conditioning (CAC)
- Solar inverters
- High frequency line drivers
