IRS21864PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS21864PBF |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 15V |
| Nominal Supply Current | 240μA |
| Power Dissipation | 1.6W |
| Output Current | 4A |
| Max Supply Current | 240μA |
| Propagation Delay | 250 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 170 ns |
| Rise Time | 38ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 170 ns |
| Rise / Fall Time (Typ) | 22ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 20.1676mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21864PBF Overview
In order to increase flexibility, the package 14-DIP (0.300, 7.62mm) is used.There is a package in the form of Tube.Its recommended mounting way is Through Hole.A supply voltage of 10V~20V demonstrates its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.Non-Inverting is the input type used in this program.Its configuration starts with 14 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS21864PBF.The device is mounted using Through Hole.A total of 14 pins are available on the device.A supply voltage of 15V is required for operation.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.The maximum output current can amount to 4A.There are several useful electronic components in this subcategory of MOSFET Drivers.Maximum (Bootstrap) voltage can be up to 600V.Based on its basis, it integrates 2 outputs.Mosfet driver supports an output current of 4A.Considering its maximum power dissipation, 1.6W shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 240μA in order to achieve greater stabilMosfet gate driversy.With its power supplies of 15V, it solves the power supply problems for diverse applications.
IRS21864PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
IRS21864PBF Applications
There are a lot of Infineon Technologies IRS21864PBF gate drivers applications.
- DC-DC Converters
- Industrial Modules
- Digitally controlled power supplies
- Motor Controls
- Pulse transformer drivers
- Motor controllers
- RGB applications
- Smart Phones
- DC/DC converters
- High power buffers
