IRS2336DJPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 2W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | IRS2336DJPBF |
| JESD-30 Code | S-PQCC-J32 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Max Output Current | 350mA |
| Nominal Supply Current | 200mA |
| Power Dissipation | 2W |
| Output Current | 200mA |
| Propagation Delay | 750 ns |
| Input Type | Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 190ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 750 ns |
| Output Polarity | INVERTED |
| Release Time | 530 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 125ns 50ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | 3-Phase |
| Turn On Time | 0.75 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.75 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 3.69mm |
| Length | 16.66mm |
| Width | 16.66mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2336DJPBF Overview
The 44-LCC (J-Lead), 32 Leads package offers greater flexibility.Tube represents the package.It's mounted on the way to Surface Mount.In the absence of a 10V~20V supply voltage, its superiority can be demonstrated.A gate type of IGBT, N-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.There are 32 terminations to form the base of its configuration.Many related parts can be found under its base part number IRS2336DJPBF.Mosfet driver is mounted using the Surface Mount method.At the time of design, it is configured with 44 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 350mA.Max (Bootstrap) can be as high as 600V.For its basis, there are 6 outputs integrated.Mosfet driver supports an output current of 200mA.Having the maximum power dissipation of 2W indicates its maximum capacity to conduct power losses without overheating.In this case, it produces a voltage of 20V.This function has an input of STANDARD.Resistance 100Ohm is used for operation.
IRS2336DJPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 2W
Resistance of 100Ohm
IRS2336DJPBF Applications
There are a lot of Infineon Technologies IRS2336DJPBF gate drivers applications.
- General Purpose 3-Phase Inverter
- High frequency line drivers
- Power factor correction (PFC) circuits
- Solar inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Gate Driver Supplies
- Motor controllers
- Telecom switch mode power supplies
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
