IRSM836-044MA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-PowerVQFN |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Applications | Appliance |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 22W |
| Technology | UMOS |
| Voltage - Supply | 13.5V~16.5V |
| Terminal Position | QUAD |
| Supply Voltage | 15V |
| Base Part Number | IRSM836-044 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Max Output Current | 4A |
| Power Supplies | 15V |
| Interface | Parallel |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Nominal Supply Current | 125μA |
| Output Configuration | Half Bridge (3) |
| Max Supply Current | 3.35mA |
| Turn On Delay Time | 1.5 μs |
| Logic Function | AND |
| Turn-Off Delay Time | 1.5 μs |
| Collector Emitter Voltage (VCEO) | 250V |
| Max Collector Current | 4A |
| Voltage - Load | 200V Max |
| Number of Drivers | 6 |
| Isolation Voltage | 1.5kV |
| Switching Frequency | 20kHz |
| Motor Type - AC, DC | AC, Synchronous |
| Height | 950μm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRSM836-044MA Overview
There is a Traypackage included in the design.Drivers controllers is packaged wDrivers controllersh a 36-PowerVQFN case.In most cases, it is recommended to mount the part at Surface Mount.The component connected in Applianceis compatible with it.Drivers controllers is capable of supplying 13.5V~16.5V volts.A range of -40°C~150°C TJis available for operating temperature.A AC, Synchronousmotor can be classified as a type of motor.A total of 36terminations are available in this part.Voltage can be applied at a rate of 200V Max volts to the load.This amplifier should be operated at 15V.Its recommended mounting way is PCB, Surface Mount.A AC MOTOR CONTROLLERanalog integrated circuit is used in the device.Based on the IRSM836-044part number, it is found.36pins are available on the device.Drivers controllers is part of the series [0].3outputs are available in total.In order to achieve the operation requirements, the maximal output current reaches [0].Currently, it is equipped with 6 drivers.
IRSM836-044MA Features
Applications : Appliance
Load voltage across the chip 200V Max
base on IRSM836-044 number
designed with 3 outputs
with 6 Drivers
IRSM836-044MA Applications
There are a lot of Infineon Technologies IRSM836-044MA motor drivers applications.
- Charge pump circuits
- Landscape lighting
- Lighting for health and wellbeing
- parking lights
- Step-up or step-down driver topologies
- Mobile phone display backlight and key light driving
- Multiple output capability
- Tunnel lights
- Handheld devices
- drivers for outdoor application
