IRU3037ACSTRPBF
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRU3037ACSPBF |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~25V |
| Control Features | Enable, Soft Start |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 440kHz |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Height | 1.5748mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
IRU3037ACSTRPBF Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.2V~25V and has a 4.2V~25V supply voltage. Worked in an dc switcher with a 0°C~70°C TA rating. The switching controller can be switched at 400kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. The 8 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. You can find other relevant dc to dc converter ics by searching "IRU3037ACSPBF". 8 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 800mV voltage according to the test statistics. normally, the dc dc regulator's output current is 15A, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 90 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator has a maximum frequency of 440kHz.
IRU3037ACSTRPBF Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
IRU3037ACSTRPBF Applications
There are a lot of Infineon Technologies IRU3037ACSTRPBF DC to DC converter applications.
- Analog precision reference circuits
- Machining centers
- CMM
- Injection molding machinery
- PSRR circuits
- Access control systems
- Precision electronic equipment
- Computer application technology
- Balance equipment
- Various precision measuring detectors
